For a COMPLETE overview of the different modes please see the full FAQ’s here.
Gaming Monitor
General
Q.
How do I select or enable a setting in the monitor menu?
A.
Selections are always made by navigating to the right, not by pushing the button in. So once you are on a setting you will see options for it, for example HDR Mode will have the option for ON or OFF:
To Enable HDR mode you simply move right and the down to highlight “On” and then move right to select that option:
Q.
How do the modes work/Why some greyed out?
A.
The monitor can only run in one of the modes at a time, so enabling one of the picture enhanced modes will grey out the modes beneath it. The hierarchy is HDR>DCR>MPRT. Thus, if you enable HDR mode, BOTH DCR and MPRT are unavailable. If you enable DCR, MPRT is unavailable.
Q.
What is required for HDR on this monitor?
A.
A GPU that supports HDR with a Display Port Connector that is at least version DP 1.4 or an HDMI Connector that is at least version HDMI 2.0.
Q.
What are the Gaming Plus Features?
A.
A Crosshair, Timer and FPS Counter can all be enabled on the monitor.
Q.
Does the Funai Gaming Monitor support AMD FreeSync?
A.
Yes. Navigate to Gaming Setup-> FreeSync to enable it.
Q.
Does the Funai Gaming Monitor support NVIDIA G-Sync?
A.
Not at this time.
Q.
Where can I download the latest drivers?
A.
https://www.funaiamerica.com/support
Q.
How do I upgrade the firmware of this monitor?
A.
You will need a USB drive and the latest firmware from
https://www.funaiamerica.com/support
Once you have saved the firmware to the USB drive you will need to insert into the USB slot on the back of the monitor labeled “Service”
Then navigate to System Set-> USB Upgrade-> Confirm to begin the update
Technical
Q.
Why is the picture washed out in DCR or MPRT mode?
A.
You likely have HDR enabled on your display settings in Windows. This setting should ONLY be enabled if you plan to use the monitor in HDR mode. See the section below concerning whichever mode you are using (DCR or MPRT).
Q.
How do I enable HDR mode?
A.
To fully enable HDR on your monitor, you will need to change the settings for Windows Display and on the Monitor itself. You may also have to adjust some of the settings for your GPU.
Q.
What settings do I adjust on the Monitor for MPRT or DCR?
A.
Navigate to the Gaming Settings Menu and then make certain HDR mode is OFF. Then select DCR ON or MPRT ON. If DCR is set to ON, MPRT will be greyed out and not selectable. If you are trying to enable MPRT mode and it is greyed out, make certain that BOTH HDR mode and DCR mode are set to OFF.
Q.
Why can I not adjust any of the picture settings?
A.
To manually adjust the picture settings, you cannot be in HDR mode and you have to select the USER profile and not one of the preset profiles. If you find that the Brightness, Contrast, etc are greyed out, navigate to Display->Profile->User and enable that profile.
Q.
What is the use of the crosshair/How do I enable the crosshair?
A.
Funai Gaming Monitors can improve your aim with a crosshair overlay. Simply choose the style of crosshair you prefer and it will be overlayed on screen for you to use as a guide. Navigate to Gaming Setup->Game Plus-> Crosshair and select the style you prefer:
For a COMPLETE overview of the different modes please see the full FAQ’s here.